Plotting Calculators
Navigation calculations for plotting a course
© 2026 Fregata, LLC. All rights reserved.
Distance
Speed
Time
D = S × T / 60
S = 60 × D / T
T = 60 × D / S
NM
kn
min
–NM
–kn
–min
True → Compass (TVMDC)
Add West, subtract East going down
°T
–°M
–°C
Leave Variation at 0° to go from Magnetic to Compass.
Compass → True (CDMVT)
Add East, subtract West going down
°C
–°M
–°T
Leave Deviation at 0° to go from Magnetic to True.
Consumption (GPH)
GPH = total gallons ÷ engine run hours
gal
hr
–gph
Consumption (MPG)
NMPG = speed ÷ GPH
kn
gph
–nmpg
Range
Range = (gallons − reserve) × NMPG
gal
%
nmpg
–NM
–NM
Plotted course
°M
kn
NM
–min
Current
°M
kn
–NM
Fix
Taken at the end of the plotted time
°M
NM
Resultant course
Where you end up if you follow the plotted course without allowing for current
–°M
–kn
–NM
Plotted courseCurrentResultant course
Adjusted course
The heading to steer at your plotted speed so you reach your destination despite the current
–°M
–min
–NM
–kn
To arrive in the plotted time
–°M
–kn
Plotted courseReciprocal currentAdjusted course
Current from a fix
The actual set and drift, from where the fix puts you compared with your plotted position
–°M
–kn
Plotted courseCurrentCourse to fix
Decimal degrees
Degrees & decimal minutes
Latitude
′
Longitude
′
Degrees, minutes, seconds
Latitude
′
″
Longitude
′
″
Latitude
–
–
–
–
Longitude
–
–
–
–